Paver & Polymeric Sand How-To Guides

How Alliance Gator Maxx G2 polymeric sand handles paver and natural stone joints up to 4 in: specs, where it can and cannot go, install steps, coverage per bag and warranty.

Wet look sealers enhance color and usually leave a film, while natural look sealers keep pavers close to their unsealed appearance. Compare base, surfaces, coverage and rain-safe times from manufacturer data sheets, then test before you commit.

Most polymeric sands stop at 1 inch or less. Compare the products rated for wide joints up to 6 inches, their minimum depths, overlay limits and flagstone guidance, and see how quickly coverage drops as joints get wider.

Flagstone joints are wide and irregular, so pick a polymeric sand whose data sheet rates it for natural stone, your widest joint and your base. Compare joint widths, compaction and coverage, then test on your stone first.

Why every patio, walkway and driveway needs paver edging, how plastic edge restraints and cementitious edging differ, how to choose between them, and how Alliance Gator, SEK, SRW and Techniseal say to install their products.

Replacing polymeric sand means removing the old joint material to full depth, drying the pavers completely, then installing, compacting and activating new sand exactly as its data sheet describes before curing and optional sealing.

The prep sequence paver sealer manufacturers publish: spot-treat oil and rust, replace joint sand, wash with an efflorescence cleaner, then let everything dry for the time on your sealer's data sheet before you seal.

A reference chart of polymeric sand coverage per bag, product by product and joint width by joint width, taken from manufacturer data sheets, plus how to measure your area and joints and why a small allowance for extra helps.

Rain-safe times for polymeric sand range from 15 minutes to 24 hours depending on the product. Compare the windows each manufacturer publishes, learn how to plan around the forecast, and find out what to do if rain arrives early.