Best Polymeric Sand for Travertine Pavers

Rhino Power Bond Plus polymeric sand 50 lb bag, for travertine, flagstone and paver joints up to 2 in

Polymeric Sand Store Hardscape Experts |

Travertine is soft, porous natural stone, and that changes how you fill the joints. A polymeric sand that works fine on concrete pavers can leave a haze in travertine's pores, and the wrong cleaner can etch the face for good. The safest choice is a polymeric sand whose manufacturer lists natural stone or travertine as an approved surface, installed on completely dry stone.

This guide lists the polymeric sands we carry that are approved for travertine or natural stone, how to match one to your joint width, and how to install it without hazing the stone.

Quick answer

  • Rhino Power Bond Plus lists travertine by name, for joints from 1/8 in to 2 in.
  • SEK PolySweep X-Treme Wide Joint lists wide cut bluestone and travertine, for joints up to 4 in, with SEK's Clear Set no haze formula.
  • For other natural stone sands, check the approved surfaces: Gator Eurostone Bond, Techniseal HP NextGel and SEK PolySweep all list natural stone.
  • Install only on completely dry stone, sweep the faces clean before watering, and never clean travertine with an acid cleaner.

Why travertine needs more care than concrete pavers

Travertine is full of small pores and voids. Fine polymer dust left on the face settles into those pores, and when you water the joints it can set there as a haze. Damp stone makes it worse: Rhino calls damp surfaces the single most common cause of haze, and notes that sand left on the paver face is what hazes, not the sand in the joint.

Rhino Power Bond Plus polymeric sand 50 lb bag, for travertine, flagstone and paver joints up to 2 in

Travertine is also acid sensitive. SRW's DW Dual Wash listing explains that marble, travertine, limestone and wet cast all etch when an acidic cleaner touches them, and that etching is permanent. So both the jointing product and the cleanup plan matter.

Polymeric sands approved for travertine and natural stone

Product Joint width What the listing says about stone Price when written
Rhino Power Bond Plus 1/8 in to 2 in Concrete pavers, natural stone, flagstone, travertine, bluestone, slate $36.99 (10 lb) to $83.99 (50 lb)
SEK PolySweep X-Treme Up to 4 in Wide cut bluestone and travertine, flagstone, irregular natural stone $79.99
Gator Eurostone Bond Up to 1-1/2 in Built for flagstone, bluestone and irregular natural stone $91.99
Techniseal HP NextGel 1/16 in to 4 in Natural stone, slabs, highly textured surfaces, concrete slab $84.99
SEK PolySweep Up to 3/4 in Natural stone, Clear Set no haze formula $79.99

Check the product page for today's price. Approved surfaces are each manufacturer's published list as shown on the product page.

How to choose for your travertine job

  • Tight joints on tumbled or cut travertine pavers (up to 3/4 in): SEK PolySweep, or Rhino Power Bond Plus if you want to name travertine on the label.
  • Joints up to 2 in: Rhino Power Bond Plus, in Beige, Ivory, Slate Gray, Brown or Black Diamond. Ivory or Beige tend to blend best with light travertine.
  • Wide or irregular joints up to 4 in: SEK PolySweep X-Treme, in Tan, Platinum or Black.
  • Travertine set on a concrete slab: check for a concrete slab rating. Techniseal lists concrete slab among HP NextGel's approved surfaces.

Not sure of the color? Order 2 oz color samples and try them against a spare piece of your stone.

How to install polymeric sand on travertine without haze

  1. Start dry. The stone and the joints must be completely dry. Do not start after rain or on a dewy morning.
  2. Check the joint depth. Most sands need about 1-1/2 in. Topping up a shallow joint does not work.
  3. Do a test area in a corner before you sand the whole patio.
  4. Sweep, compact and top up as the product directions say.
  5. Clean the faces completely. Sweep with a soft broom, then use a leaf blower to clear every bit of dust from the pores before any water touches the surface.
  6. Water as directed with a shower setting, and keep to each product's weather window. SEK X-Treme, for example, needs an average ambient air temperature above 35°F for 48 hours after install and at least 12 hours without rain.

If haze does appear

Do not reach for an acid cleaner on travertine. Use an acid free cleaner made for acid sensitive stone, such as SRW DW Dual Wash, which is sold for granite, limestone, marble, travertine and bluestone and doubles as a polymeric haze remover. Test it on a small area first. Our guide to removing white haze from pavers covers the rest.

Frequently asked questions

Can you use polymeric sand on travertine?

Yes, if the manufacturer lists travertine or natural stone as an approved surface and you install it on completely dry stone. Rhino Power Bond Plus and SEK PolySweep X-Treme both name travertine.

Will polymeric sand haze travertine?

It can if it is installed on damp stone or dust is left on the face before watering. Start dry, blow the faces clean and do a test area first.

How do I clean polymeric haze off travertine?

Use an acid free cleaner made for acid sensitive stone, such as SRW DW Dual Wash, and test it first. Acid cleaners etch travertine permanently.

What color polymeric sand goes with travertine?

Light colors such as Ivory or Beige tend to blend with most travertine. Order 2 oz samples and test them against your stone.

Order 2 oz color samples to test against your travertine, then count bags with the polymeric sand calculator. Send a photo of your joints through the contact page or call (856) 418-4895 and we will recommend a product.

Related guides: Polymeric Sand for Flagstone and Natural Stone: Wide Joints, Rhino Power Bond Plus Polymeric Sand: Joints to 2 in Guide, How to Remove Polymeric Sand Haze From Pavers, Step by Step

Leave a comment