Polymeric Sand Store

Jobsite Supplies

2 products · Jobsite consumables for hardscape work.

View as

  • Jobsite Supplies

    Homax

    Homax Paint Hardener 3.5 oz, Solidifies Leftover Latex Paint

    Regular price $22.99
    In stock
    • Open the can of leftover paint and stir the powder in.
    • Leave it 15 to 20 minutes for the paint to set solid.
    • Once it is solid, put the whole can out with normal household waste in...
    • It also works to solidify water, which is useful for bilges and spills.
    View details
  • Jobsite Supplies

    SRW Products

    SRW 6 Mil Poly Sheeting

    Regular priceFrom $59.99
    In stock
    • 6 mil thickness, tear resistant.
    • Protects unfinished work from rain, critical before polymeric sand cures.
    • Moisture retention for concrete curing.
    • Full ground cover from underneath.
    View details

About jobsite supplies

Jobsite consumables for hardscape work. Poly sheeting is the one most people wish they had bought before they needed it: covering freshly installed polymeric sand when rain arrives before the joints have cured, protecting siding and planting beds from sealer overspray, and keeping material dry overnight.

Read the full guide

This category is small on purpose. We stock the consumables that hardscape crews actually run out of mid job rather than a general hardware range.

Why Poly Sheeting Matters on a Sand Job

Polymeric sand needs a dry window after watering, usually at least 24 hours. If an unforecast shower arrives before the binder sets, it washes out of the joints and the job has to be redone. Tenting the area with sheeting propped so it does not touch the wet joints will usually save it.

  • Prop the sheeting, never lay it flat on curing joints
  • 6 mil is the practical minimum for outdoor use
  • Also useful for masking during sealer application
  • Keep a roll on the truck, it is cheap insurance

Protecting a Seal Job

Sealer overspray on siding, windows, planting beds or a neighbouring driveway is difficult to remove once it cures, and solvent based products are worse than water based. Masking with sheeting before you start takes minutes and saves a callback.

  • Mask anything within reach of overspray, including plants
  • Solvent sealers carry further on a breeze than people expect
  • Weight the edges, wind will lift sheeting mid job
  • Pair with a solvent rated sprayer from tools
Need Something Not Listed?
We can usually source jobsite consumables through our existing suppliers. Call (856) 418-4895 or email info@polymericsandstore.com.