SRW Vertical Instant Lock Adhesive, 9.5 oz
Grabs in Five Seconds, Holds 25 Pounds
The adhesive for gravity-defying work: seven times thicker than standard adhesives, it grabs in under 5 seconds and holds up to 25 pounds on vertical surfaces, materials up to 2 inches thick. Ten minutes of working time to fine-tune placement, then it cures quick, non-corrosive and low odor. The V-notch nozzle lays the right bead every time. SRW recommends their 18:1 Premium Caulking Gun for this cartridge.
|
Ships Same Day From our NJ warehouse |
9.5 oz cartridge One size |
Holds strong in under 5 se… Key spec |
Real Humans (856) 418-4895 |
Why Contractors Ask for Vertical Instant Lock Adhesive by Name
Cheap adhesive fails in the seasons, not in the showroom: bonds that let go after a winter, beads that would not stick to damp block, caps that walk off a wall.
- Holds strong in under 5 seconds, up to 25 lbs with most materials.
- 7x thicker than other adhesives, holds pieces up to 2 in thick.
- 10 minute working time for adjustment.
- Rated to 200F, indoor and outdoor.
Where Vertical Instant Lock Adhesive Works
Vertical Instant Lock Adhesive is recommended by SRW Products for the materials below:
- Stone and manufactured veneers
- Dry stack and masonry repair
- Outdoor kitchens
- Brick, block, pavers, metal, wood, glass and tile
Where Vertical Instant Lock Adhesive Should NOT Be Used (Straight From the Manufacturer)
We would rather tell you this before you buy than argue about it after. Per SRW's technical data sheet, the cured adhesive should not exceed 200F, so keep it away from fire boxes and direct flame, and avoid storage above 120F.
Not sure if your project qualifies? Call or text us at (856) 418-4895 before you order. We will give you a straight answer, even if the answer is that this is not the right product for your job.
Installation at a Glance
The full step by step guide is in the official TDS below. Here is the shape of the job:
- Surfaces. should be clean and sound; check the label for damp-surface allowances.
- Cut. the nozzle to bead size and apply per the label pattern.
- Join. the pieces within the working time and support as needed while it sets.
- Allow. full cure per the label before loading.
Check the label's application temperature range before starting, and always test adhesion on your specific materials first.
Quick Answers
How much working time do I have?
It varies by product; check the label before the first bead. Fast products reward having everything dry-fit first.
Cold weather?
Each adhesive lists its application range. If you are building in the shoulder seasons, our Superior Strength line extrudes down to 10F.
How long until full strength?
Set time gets you hands-off; full cure per the label is when it takes real load.
How long do I have to position the piece?
About 10 minutes of working time, with full cure in 24 hours. Clean uncured squeeze-out with mineral spirits.
Is there anything I should know about handling it?
Wear gloves and eye protection, follow the label, and keep it away from children and pets until placed or cured. Full precautions are in the SDS below.
Official SRW Products Documentation
Download the Vertical Instant Lock Adhesive SDS (PDF) →
Download the Vertical Instant Lock Adhesive TDS (PDF) →
Documents are published by SRW Products. For the most current versions, visit srwproducts.com.
Order before our daily cutoff and your Vertical Instant Lock Adhesive ships today from New Jersey.
Questions about your project? Call or text (856) 418-4895 and you will get a real person who works with these adhesives every day.
Not sure how many 50 LB bags of polymeric sand your paver project will need? Try our Polymeric Sand Calculator