SRW PRX Paver Restore X-Treme Pigmented Sealer
Puts the Color Back in Faded Pavers
The rescue product for faded pavers: a pigmented, high-gloss wet-look sealer that puts rich color back into surfaces the sun has washed out. It highlights the pigments still in the paver, percolates around exposed aggregate to even out irregular color, and seals with the durability driveways demand. Solvent based and VOC compliant, for exterior use.
|
Ships Same Day From our NJ warehouse |
2 Sizes Pick yours above |
Color-reviving pigmented f… Key spec |
Real Humans (856) 418-4895 |
Why Contractors Ask for PRX Paver Restore X-Treme Pigmented Sealer by Name
A sealer job that goes wrong is worse than no sealer: blushing, peeling, blotchy color, joints that still wash out. The failures almost always trace to the wrong product, a damp surface, or too many coats of the wrong thing.
- Color-reviving pigmented formula for faded pavers.
- High gloss, wet look finish.
- Evens out exposed aggregate and irregular color.
- Durable enough for driveways and commercial surfaces.
Coverage: How Many Gallons Do You Need?
Per SRW's technical data sheet, PRX Paver Restore X-Treme Pigmented Sealer covers:
- Per gallon: up to 250 sq ft
Coverage varies with surface porosity and application. For an exact count, use our free Sealer Calculator, or call or text us at (856) 418-4895 with your square footage and surface type.
Where PRX Paver Restore X-Treme Pigmented Sealer Works
PRX Paver Restore X-Treme Pigmented Sealer is recommended by SRW Products for the surfaces below:
- Faded concrete and permeable pavers
- Exposed aggregate concrete
- Granite, marble, travertine and limestone
Where PRX Paver Restore X-Treme Pigmented Sealer Should NOT Be Used (Straight From the Manufacturer)
We would rather tell you this before you buy than argue about it after. Per SRW's technical data sheet, do not use more than one sealer on the same project unless it is HGX, and never seal a wet or damp surface.
Not sure if your project qualifies? Call or text us at (856) 418-4895 before you order. We will give you a straight answer, even if the answer is that this is not the right product for your job.
Installation at a Glance
The full step by step guide is in the official TDS below. Here is the shape of the job:
- Clean. the surface fully and let it dry. New pavers should be 60 to 90 days from their manufacture date before sealing.
- Apply. thin, even coats with an SRW slit foam roller or suitable sprayer.
- Follow. the label for coat count, recoat window and cure time before traffic.
Apply between 50F and 80F on a completely dry surface, allow 24 hours before foot traffic, and always test in a small discrete area first.
Quick Answers
How soon can I seal new pavers?
Wait 60 to 90 days from the paver's manufacture date, then clean, dry, and seal.
How soon after sanding joints?
Let polymeric sand cure fully first; 28 days is the safe rule of thumb.
Roller or sprayer?
Either, thin and even. Use the SRW slit foam roller matched to your sealer type, or a sprayer rated for it: solvent-based products need solvent-rated equipment.
Is there anything I should know about handling it?
Wear gloves and eye protection, follow the label, and keep it away from children and pets until placed or cured. Full precautions are in the SDS below.
Official SRW Products Documentation
Download the PRX Paver Restore X-Treme Pigmented Sealer TDS (PDF) →
Documents are published by SRW Products. For the most current versions, visit srwproducts.com.
Order before our daily cutoff and your PRX Paver Restore X-Treme Pigmented Sealer ships today from New Jersey.
Questions about your project? Call or text (856) 418-4895 and you will get a real person who works with sealers every day.
Not sure how many 50 LB bags of polymeric sand your paver project will need? Try our Polymeric Sand Calculator