SEK Surebond SB-25 Insta-Grip Vertical Hardscape Adhesive, 20 oz Sausage Tube
by SEK SUREBOND
Availability:
in stock, fast shipping!
Original price
$34.99
-
Original price
$34.99
Original price
$34.99
$34.99
-
$34.99
Current price
$34.99
Ten Second Grip, So The Stone Stays Where You Put It
Vertical work has one problem: gravity. Insta-Grip is formulated for strong initial tack and non sag hold, so veneer and vertical stone stay put without temporary support while the adhesive cures. You get initial grip in about 10 seconds and can still reposition for the first few minutes.
10 seconds
Initial grip
Non sag
No temporary bracing
30 to 40 ft
Linear feet, 3/8 in bead
24 hours
Full cure at 70 F
Why Vertical Needs Its Own Adhesive
A structural adhesive like SB-10 is built for compression: caps sitting down on a wall. Vertical veneer is a shear problem, and if the adhesive lets the piece creep even a quarter inch before it cures, the whole course reads crooked. Insta-Grip trades some open time for tack that holds immediately.
- Strong initial tack with non sag hold. Place it and it stays there.
- Repositionable for the first few minutes. Grip does not mean instantly permanent.
- Solvent free and non yellowing. It will not bleed or discolour light stone.
- Excellent UV resistance. Built for exterior exposure.
- Flexible at low temperature. With minimal shrinkage as it cures.
Timing
| Initial grip | About 10 seconds |
| Working time | 3 to 5 minutes |
| Initial cure | 20 minutes or less |
| Full cure | 24 hours at 70 F and 50 percent humidity |
| Minimum dispensing temperature | 68 F |
Coverage And Limits
The thickness limit is the specification people miss, and it is the one that causes failures.
| Coverage | 30 to 40 linear feet per 20 oz tube at a 3/8 in bead |
| Maximum material thickness | 2 in for vertical installation |
| Heavy materials | 20 lb and over may still need fixturing while it cures |
| Use location | Interior and exterior |
What It Bonds To
- Natural and manufactured stone veneer
- Pavers, brick and block
- Vertical and overhead hardscape features
SB-25 Insta-Grip Specifications
| Product Type | Vertical hardscape veneer adhesive |
| Manufacturer | SEK Surebond |
| Size | 20 oz sausage tube |
| Initial Grip | About 10 seconds |
| Working Time | 3 to 5 minutes |
| Initial Cure | 20 minutes or less |
| Full Cure | 24 hours at 70 F, 50 percent humidity |
| Coverage | 30 to 40 linear feet per tube at 3/8 in bead |
| Maximum Thickness | 2 in for vertical work |
| Minimum Temperature | 68 F for dispensing |
| Formula | Solvent free, non yellowing, UV resistant |
| Dispensing | Sausage gun required |
Veneer Heavier Than 20 lb?
Heavy pieces may still want temporary fixturing even with a non sag adhesive. Tell us the material and the thickness and we will tell you whether you need bracing. Call or text (856) 418-4895 or email info@polymericsandstore.com.
Technical Documents
Documents open from the manufacturer, so you always get the current revision. Every sheet we carry is also listed on our TDS and SDS library.
Not sure how many 50 LB bags of polymeric sand your paver project will need? Try our Polymeric Sand Calculator