SEK Surebond SB-1300 Joint Stabilizing Paver Sealer, Matte Finish, 1 Gallon
SEK Surebond SB-1300 Joint Stabilizing Paver Sealer, Matte Finish, 1 Gallon is backordered and will ship as soon as it is back in stock.
Ships same day on weekday orders placed before the 14:00 ET cut-off.
Typically 1 to 5 business days by UPS, FedEx Ground or USPS. Enter your ZIP for your dates.
Request a pallet quoteHow much do I need?Call (856) 418-4895
- Brand
- SEK SUREBOND
- Type
- Paver and Stone Sealers
About this item
- Two jobs, one pass. Stabilizes the joint sand and seals the surface in the same application.
- Antifungal. Formulated to inhibit mold, moss and algae, which is what shaded patios actually struggle with.
- Breathable. Does not trap moisture or efflorescence under a film, which is how sealers cause the white bloom they were meant to stop.
- Stain resistant. Spills sit on the surface rather than soaking into the paver.
- Reduced sand washout. Fewer weeds, fewer ants, less joint refilling.
Shipping, pick-up and returns
Shipping, pick-up and returns
Orders ship from Williamstown, New Jersey by UPS, FedEx Ground or USPS; weekday orders placed before 2 PM Eastern go out the same day. Warehouse pick-ups (call first so we can pull your order) and drop-off returns Monday to Friday 8 to 5, Saturday 8 to noon.
SEK Surebond SB-1300 Joint Stabilizing Paver Sealer, Matte Finish, ...
SEK Surebond SB-1300 Joint Stabilizing Paver Sealer, Matte Finish, 1 Gallon is backordered and will ship as soon as it is back in stock.
How many bags do I need?
Coverage per bag comes from the manufacturer's data sheet for this exact sand.
BaseWater based
FinishNatural look, matte
Coverage, stabilizing80 to 120 sq ft per gallon
Coverage, sealing only150 to 300 sq ft per gallon
Why SEK Surebond SB-1300 Joint Stabilizing Paver Sealer?
Protection That Does Not Change How The Patio Looks
Most sealers announce themselves. Gloss, sheen, a darker paver. SB-1300 dries clear to a matte finish, so the reason to use it is protection and joint stability rather than appearance.
Full description and specs
Finish
Natural look, matte
Appearance
Milky white when applied, dries clear
Coverage
80 to 120 sq ft per gallon
Base
Water based
Goes with this
The usual companions for this job, at the same price as on their own pages.
-
This item: SEK Surebond SB-1300 Joint Stabilizing Paver Sealer, Matte Finish, 1 Gallon$88.99 -
$39.99
-
$84.99
Total for 1 items: $88.99
Same prices as buying them one at a time.
Description
Description
Protection That Does Not Change How The Patio Looks
Most sealers announce themselves. Gloss, sheen, a darker paver. SB-1300 dries clear to a matte finish, so the reason to use it is protection and joint stability rather than appearance. It goes on milky white and dries clear, which is how you can see your coverage while you work.
- Two jobs, one pass. Stabilizes the joint sand and seals the surface in the same application.
- Antifungal. Formulated to inhibit mold, moss and algae, which is what shaded patios actually struggle with.
- Breathable. Does not trap moisture or efflorescence under a film, which is how sealers cause the white bloom they were meant to stop.
- Stain resistant. Spills sit on the surface rather than soaking into the paver.
- Reduced sand washout. Fewer weeds, fewer ants, less joint refilling.
Coverage Per Gallon
Coverage splits hard depending on whether you are stabilizing joints or just sealing the surface. Stabilizing pulls sealer down into the sand, so it uses far more.
| With joint stabilization | 80 to 120 sq ft per gallon |
| Sealing only, no stabilization | 150 to 300 sq ft per gallon |
| Basis | One coat. Porosity, age and application method move the real number |
Approved Surfaces
SEK rates SB-1300 for the following. Natural stone and clay vary batch to batch, so SEK asks you to test a small area first to confirm both performance and appearance.
- Concrete and clay pavers
- Stamped and flat concrete
- Masonry and exposed aggregate
- Natural and manufactured stone
- Segmental retaining wall block and concrete walls
- Can be applied immediately after installation
- Horizontal and vertical surfaces
Where It Should Not Be Used, Straight From SEK
These are the manufacturer’s exclusions, not ours.
- Granite and marble. Not recommended.
- Asphalt. Not recommended.
- Glazed or ceramic tile. Not recommended.
- Always test a small area first. Natural stone and clay vary, and SEK asks for a test patch every time.
SB-1300 Specifications
| Product Type | Joint stabilizing sealer, single component acrylic co-polymer |
| Manufacturer | SEK Surebond |
| Base | Water based |
| Finish | Natural look, matte |
| Appearance | Milky white when applied, dries clear |
| Coverage, stabilizing | 80 to 120 sq ft per gallon |
| Coverage, sealing only | 150 to 300 sq ft per gallon |
| Antifungal | Yes, inhibits mold, moss and algae |
| Breathable | Yes, does not trap moisture or efflorescence |
| Freeze Resistance | To -60 F |
| Heat Stability | To 180 F |
| Compliance | Non hazardous, VOC and EPA compliant |
| Size | 1 gallon |
Before You Seal
Every SEK sealer wants a clean, dry surface. If the pavers have efflorescence, ground in dirt or an old failed sealer on them, that has to come off first or the new sealer bonds to the contamination instead of the paver.
Data sheets
Data sheets
The manufacturer's technical data sheet (coverage, joint width, cure and rain-safe times) and safety data sheet are collected in the TDS and SDS library. Every figure on this page comes from those sheets.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Questions about this product
Ask a question ›When will it ship?
Can I buy by the pallet?
Where are the technical and safety data sheets?
Is contractor or bulk pricing available?
How to seal pavers
Step by step, start to finish. Click to play.
