Techniseal Structure Bond Adhesive Dispenser Gun 60050802

Why Contractors Ask for Structure Bond Gun by Name

A poor dispenser wastes expensive adhesive, drips onto finished stone, and makes long runs exhausting. Over a season the gun pays for itself in material alone.

• It is purpose built for Structure Bond products. Techniseal designed it around their own canister, so the fit, flow, and control are matched rather than approximated.
• Minimal dripping. Adhesive dripped onto a finished paver face is a cleaning job at best and a permanent mark at worst.
• Better access to hard to reach areas. Wall corners, tight returns, and confined spaces are where a bulky dispenser costs you time.
• Built to minimize waste. Structure Bond is a high yield product, and the gun is what lets you actually realize that yield rather than losing material to poor control.
• Light weight combined with strong durability. A full day of wall building is a lot of trigger pulls, and a heavy gun is felt by mid afternoon.
• It is a tool, not a consumable. Buy it once and run canisters through it.

Structure Bond Gun Specifications

Where Structure Bond Gun Works

If you are running Structure Bond, you need this.

• Retaining wall and seating wall construction
• Cap stone and coping installation
• Column and pillar work
• Outdoor kitchen and fire pit structures
• Step treads and risers
• Any job using the Structure Bond canister system
• Crews who go through adhesive in volume and want the yield they paid for

How to Install Structure Bond Gun

Follow the official Techniseal instructions, linked below. This is the shape of using it:

1. Thread the Structure Bond canister onto the gun per the instructions.
2. Set the flow adjustment for the bead size the application calls for.
3. Test the bead on a scrap surface before you apply to finished work.
4. Apply with steady, even trigger pressure to keep the bead consistent.
5. Release pressure between runs to prevent dripping onto finished surfaces.
6. Clean the gun per the instructions before the adhesive cures inside it.

Cleaning the gun the same day is not optional with polyurethane foam. A dispenser left uncleaned overnight is usually a dispenser you replace.

Quick Answers

Do I need this to use Structure Bond?
Yes. Structure Bond is a canister system that requires a compatible dispenser, and this is the one Techniseal makes for it.

Will it work with regular caulking tubes?
No. It is designed for the Structure Bond canister, not conventional cartridges.

Can I use it with StickyStone?
No. StickyStone has its own dispenser, which converts between 10 oz cartridges and 20 oz sausages.

How do I clean it?
Follow the Techniseal instructions and clean it before the adhesive cures. Cured foam inside the gun is effectively permanent.

Is it worth buying separately?
If you use Structure Bond at all, yes. The material savings from controlled delivery and less waste add up quickly.

Pairs Well With

• Techniseal Structure Bond adhesive canister, the product this gun is made for
• Techniseal Structure Bond PU Paste for gap filling and shimming applications
• Techniseal StickyStone and its dispenser for vertical veneer work

Questions about your project? Call or text (856) 418-4895 and you will get a real person who works with hardscape tools every day.