SEK Surebond SureClean Hardscape Cleaner Sample, 8 oz

What You Get

One 8 ounce bottle of SEK Surebond SureClean Concentrated Hardscape Cleaner, drawn from a factory sealed container and filled here at our New Jersey warehouse.

• 8 ounce sample bottle with a sealed cap, clearly labeled
• The same super concentrate as the gallon, dilutes 1 to 36 at standard strength
• Enough for a test patch, typically roughly 400 square feet once diluted

The Concentration Is the Whole Point

SureClean is a super concentrate. At standard dilution one gallon yields 36 gallons of ready to use cleaner and covers around 6,500 square feet, which means this 8 ounce sample makes well over two gallons of working solution and will clean a few hundred square feet on its own.

That makes it an unusually useful sample. Most people find it does a real section of patio rather than a token test patch, so you learn both whether it cleans your surface and how far the full gallon will actually stretch on your job.

How to Use the Sample

• Dilute per the SEK label, standard strength is 1 part cleaner to 36 parts water
• Mix only what you will use, diluted cleaner does not store well
• Wet the surface, apply, and let it dwell without drying
• Agitate with a stiff brush, then rinse thoroughly
• Let the surface dry fully before judging the result

Where SureClean Fits

It is non acid and alkaline based, and it is the cleaner SEK expects you to use before applying one of their sealers.

• General deep cleaning of pavers and slabs
• Ground in dirt and traffic film
• Pre-seal preparation on any SEK sealer job
• Large areas where a concentrate is more economical

Ready for the Full Size?

Once the sample confirms it does the job, the full SEK Surebond SureClean, 1 gallon is here. Browse every paver and stone cleaner we carry, or the rest of our sample bottles and color kits.