Milwaukee M18 0884-20 Compact Blower, Tool Only, 18 V, 100 CFM
The Blower That Stops Polymeric Haze Before It Starts
Every polymeric sand bag says the same thing: get every grain off the paver faces before you water. Sand left sitting on the surface is what cures into haze, and a broom does not get it out of a chamfer. The Milwaukee M18 compact blower moves 100 CFM at 160 mph off the same batteries you already carry. Tool only, ships same day from New Jersey.
|
Ships Same Day From our NJ warehouse |
100 CFM / 160 MPH Class-leading for its size |
|
Tool Only Runs on any M18 battery |
3 Speeds Electronic switch and variable trigger |
Why a Hardscaper Buys This One
- It is the haze step. Sweeping gets the bulk of the sand off, but the film sitting in the chamfer and the surface texture is what hazes. Blowing it clean before you activate is the difference between a finished patio and a callback.
- Speed control matters on sand. Full power will pull sand back out of a joint you just filled. The three-speed switch and variable-speed trigger let you clear the face without emptying the joint.
- It runs on batteries you own. Tool only, so if you already have M18 packs on the truck this is the cheapest way to add a blower to the kit.
- Built for a jobsite. Shock-absorbing polymer body and a crush-resistant nozzle, because it will get dropped on pavers.
- It does more than clear. The universal inflator and deflator turns it into the thing that inflates the trailer tyres at the end of the day.
Milwaukee 0884-20 Specifications
| Model | M18 0884-20 compact blower |
| Air flow rate | 100 CFM |
| Air velocity | 160 mph |
| Battery | 18 V lithium-ion, M18 system |
| Battery included | No, tool only |
| Speeds | Three, electronic switch with variable-speed trigger |
| Control | Trigger with lock-on |
| Body | Shock-absorbing polymer, crush-resistant nozzle |
| Dimensions | 20-1/2 in L x 5-1/2 in W x 6-1/2 in H |
| Includes | 9 in extension nozzle, universal inflator and deflator |
| Colour | Red |
Quick Answers
Does a battery come with it?
No. This is the tool only, which is why it is priced the way it is. It runs on any Milwaukee M18 battery you already own.
Is it strong enough to clear polymeric sand off pavers?
Yes, and the more useful point is that it is controllable. Run it on a lower speed near open joints so you clear the faces without pulling sand back out.
Will it clear a whole driveway?
For clearing sand and dust off a hardscape surface, comfortably. It is a compact blower, not a backpack unit for wet leaves across an acre.
What is the extension nozzle for?
Reaching along the ground or overhead without bending or a ladder. On paver work it is what gets down into the chamfer between units.
Can I use it for anything else?
The universal inflator and deflator handles tyres and air beds, and it is the standard tool for blowing sawdust and debris off any jobsite.
Pairs Well With
- Polymeric sand, the material this tool exists to clean up after.
- Jobsite tools and equipment, brooms, rollers, sprayers and the rest of the install kit.
- The polymeric sand calculator, to size the job before you load the truck.
Order before our daily cutoff and your M18 blower ships today from New Jersey.
Questions about your project? Call or text (856) 418-4895 and you will get a real person who works with this material every day.
Not sure how many 50 LB bags of polymeric sand your paver project will need? Try our Polymeric Sand Calculator