Alliance Gator Block Bond XP Low VOC Polyurethane Adhesive
Alliance Gator Block Bond XP Low VOC Polyurethane Adhesive - 10 oz. / 1 is backordered and will ship as soon as it is back in stock.
Ships same day on weekday orders placed before the 14:00 ET cut-off.
Typically 1 to 5 business days by UPS, FedEx Ground or USPS. Enter your ZIP for your dates.
Request a pallet quoteHow much do I need?Call (856) 418-4895
- Brand
- Alliance
- Type
- Adhesives
- Sizes
- 10 oz., 28 oz.
About this item
- 850 psi at 24 hours, 1,000 psi at 7 days concrete to concrete. Alliance rates it up to 3x conventional adhesives.
- Reposition for up to 30 minutes, with working time up to an hour.
- Works above 32 F, on dry or damp surfaces.
- Non-shrinking. Does not crack or lose bond.
- Waterproof, low odor and VOC compliant.
- Rated for fire pits up to 400 F and for bonding artificial turf over seam tape.
Shipping, pick-up and returns
Shipping, pick-up and returns
Orders ship from Williamstown, New Jersey by UPS, FedEx Ground or USPS; weekday orders placed before 2 PM Eastern go out the same day. Warehouse pick-ups (call first so we can pull your order) and drop-off returns Monday to Friday 8 to 5, Saturday 8 to noon.
Alliance Gator Block Bond XP Low VOC Polyurethane Adhesive
Alliance Gator Block Bond XP Low VOC Polyurethane Adhesive - 10 oz. / 1 is backordered and will ship as soon as it is back in stock.
How many bags do I need?
Coverage per bag comes from the manufacturer's data sheet for this exact sand.
Ships Same DayFrom our NJ warehouse
10 oz and 28 ozSingle or case of 12
Reposition 30 MinPermanent bond in 24 hours
Real Humans(856) 418-4895
Why Gator Block Bond XP?
Polyurethane Adhesive With 30 Minutes to Reposition
Construction adhesive that grabs instantly sounds good until a cap sits crooked and there is nothing you can do about it. Block Bond XP gives you half an hour to get it right, then holds at 1,000 psi.
Full description and specs
850 psi at 24 hours, 1,000 psi at 7 days
Concrete to concrete. Alliance rates it up to 3x conventional adhesives.
Reposition for up to 30 minutes
With working time up to an hour.
Works above 32 F
On dry or damp surfaces.
Non-shrinking
Does not crack or lose bond.
How to Use Gator Block Bond XP
The short version. Always follow the Alliance data sheet.
-
Clean the bonding surfaces
Both faces, free of dust and debris.
-
Cut the spout
And puncture the cartridge seal with a nail.
-
Apply with a caulking gun
In a bead, or a serpentine pattern over Gator XTurf Seam Tape for artificial turf.
-
Join with a twisting motion
And press firmly. You have up to 30 minutes to reposition.
Apply at Above 32 F (0 C). Test a small area first.
Goes with this
The usual companions for this job, at the same price as on their own pages.
-
This item: Alliance Gator Block Bond XP Low VOC Polyurethane Adhesive10 oz. / 1$21.99 -
$84.99
-
$39.99
Total for 1 items: $21.99
Same prices as buying them one at a time.
Description
Description
Polyurethane Adhesive With 30 Minutes to Reposition
Gator Block Bond XP is a moisture-cured polyurethane construction adhesive rated at 850 psi in 24 hours and 1,000 psi at 7 days, with an hour of working time and 30 minutes to reposition. Up to three times the strength of conventional adhesives, and it works above 32 F on dry or damp surfaces.
|
Ships Same Day From our NJ warehouse |
10 oz and 28 oz Single or case of 12 |
|
Reposition 30 Min Permanent bond in 24 hours |
Real Humans (856) 418-4895 |
Why Contractors Ask for Gator Block Bond XP by Name
Construction adhesive that grabs instantly sounds good until a cap sits crooked and there is nothing you can do about it. Block Bond XP gives you half an hour to get it right, then holds at 1,000 psi.
- 850 psi at 24 hours, 1,000 psi at 7 days concrete to concrete. Alliance rates it up to 3x conventional adhesives.
- Reposition for up to 30 minutes, with working time up to an hour.
- Works above 32 F, on dry or damp surfaces.
- Non-shrinking. Does not crack or lose bond.
- Waterproof, low odor and VOC compliant.
- Rated for fire pits up to 400 F and for bonding artificial turf over seam tape.
- Exceeds ASTM D3498 and ASTM C557.
Gator Block Bond XP Specifications
| Sizes | 10 oz (296 ml) and 28 oz (828 ml) cartridges, single or case of 12 |
| Coverage, 10 oz | 28 to 32 linear ft of 1/4 in bead |
| Coverage, 28 oz | 79 to 90 linear ft of 1/4 in bead |
| Type | Moisture-cured polyurethane, high solids |
| Strength | 850 psi at 24 hours, 1,000 psi at 7 days |
| Working time | Up to 1 hour |
| Repositionable | Up to 30 minutes |
| Permanent bond | 24 hours |
| Minimum temperature | Above 32 F (0 C) |
| Fire pit service | Up to 400 F (204 C) |
| Standards | Exceeds ASTM D3498 and ASTM C557 |
| Cleanup | Mineral solvent immediately. Cured material must be removed mechanically |
| Shelf life | 1 year properly stored |
A 10 oz cartridge runs about 30 linear ft of 1/4 in bead and a 28 oz runs about 84 ft. Count your linear footage of caps or coping and add a cartridge, running out mid-course is worse than over-ordering.
Where Gator Block Bond XP Works
Alliance rates Gator Block Bond XP for:
- Wall caps and step treads
- Pool coping
- Retaining wall blocks and overlays
- Concrete pavers, bricks and natural stone
- Outdoor porcelain tiles
- Fire pits up to 400 F
- Artificial turf seams, in a serpentine bead over Gator XTurf Seam Tape
Where Gator Block Bond XP Should NOT Be Used (Straight From the Manufacturer)
Not for continuous submersion.
Do not use in the rain or onto standing water. It is moisture cured, so water shortens the open time rather than helping.
Wear gloves. Cured polyurethane cannot be removed from skin or tools except mechanically.
Surfaces must be clean and free of foreign matter. Test the application first if adhesion to a substrate is in any doubt.
Not sure if your project qualifies? Call us at (856) 418-4895 before you order. We will give you a straight answer, even if the answer is that this is not the right product for your job.
How to Use Gator Block Bond XP
The full step by step guide is in the official documentation below. Here is the shape of the job:
- Clean the bonding surfaces. Both faces, free of dust and debris.
- Cut the spout and puncture the cartridge seal with a nail.
- Apply with a caulking gun in a bead, or a serpentine pattern over Gator XTurf Seam Tape for artificial turf.
- Join with a twisting motion and press firmly. You have up to 30 minutes to reposition.
Clean wet adhesive off immediately with mineral solvent. Once cured it only comes off mechanically.
Single Cartridge or Case of 12?
Both sizes come either way, and the case is how contractors buy it.
- 10 oz single, a run of caps on a small wall, roughly 30 linear ft of bead.
- 28 oz single, a larger job, roughly 84 linear ft, and fewer cartridge changes.
- Case of 12, the working stock for a crew, in either size.
- Shelf life is 1 year properly stored, so buy a case only if you will get through it.
Data sheets
Data sheets
The manufacturer's technical data sheet (coverage, joint width, cure and rain-safe times) and safety data sheet are collected in the TDS and SDS library. Every figure on this page comes from those sheets.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Questions about this product
Ask a question ›What sizes are available?
When will it ship?
Can I buy by the pallet?
Where are the technical and safety data sheets?
Is contractor or bulk pricing available?
How to glue wall caps
Step by step, start to finish. Click to play.
