SRW PW Paver Wash Pre-Seal Cleaner Sample, 8 oz

What You Get

One 8 ounce bottle of SRW PW Paver Wash Pre-Seal Cleaner, drawn from a factory sealed container and filled here at our New Jersey warehouse.

• 8 ounce sample bottle with a sealed cap, clearly labeled
• The same concentrate as the gallon, dilutes one to one with water
• Enough for a test patch, typically roughly 10 square feet once diluted

Sealer Bonds to a Clean, Open Surface

PW is the prep step SRW recommends before their sealers. It opens the paver surface pores so sealer bonds properly, and clears polymeric haze, efflorescence and ground in dirt in the same wash rather than needing three products.

Sealing over a closed or dirty surface is the most common reason a sealer job fails early, and it is not something you can undo. A test patch confirms the wash clears your surface, and lets you see the colour you will actually be sealing over.

How to Use the Sample

• Pick an area you intend to seal, ideally an inconspicuous one
• Dilute one to one with water per the SRW label
• Wet the surface, apply, and do not let it dry on the paver
• Agitate with a stiff brush, then rinse thoroughly
• Let it dry completely, the surface should look clean and matte, not filmy

What PW Does in One Pass

SRW formulates it without muriatic or hydrochloric acid, so it preps the surface without etching it.

• Opens surface pores for sealer adhesion
• Clears polymeric haze
• Removes efflorescence
• Lifts ground in dirt and traffic film

Ready for the Full Size?

Once the sample confirms it does the job, the full SRW PW Paver Wash, 1 and 5 gallon is here. Browse every paver and stone cleaner we carry, or the rest of our sample bottles and color kits.