SRW Path Stabilizer for Decomposed Granite and Crushed Stone

Why Contractors Ask for Path Stabilizer for Decomposed Granite and Crushed Stone by Name

Loose material never stays put: mulch blows, gravel scatters, path fines track into the house and wash out in every storm.

• Stabilizes decomposed granite and crushed stone fines.
• Controls dust and minimizes tracking.
• Reduces weed growth.
• Safe for surrounding plants.

Coverage

Per SRW's technical data sheet, Path Stabilizer for Decomposed Granite and Crushed Stone covers:

• Residential paths: up to 75 sq ft per 5 gallons
• Commercial paths: up to 50 sq ft per 5 gallons

Coverage varies with surface and application. When in doubt, call (856) 418-4895.

Where Path Stabilizer for Decomposed Granite and Crushed Stone Works

Path Stabilizer for Decomposed Granite and Crushed Stone is recommended by SRW Products for the materials below:

• Decomposed granite paths
• Crushed stone patios and trails
• 3/8 inch minus fines

SRW says to avoid clean stone such as pea gravel, chip stone, decorative rock or sand.

Installation at a Glance

The full step by step guide is in the official TDS below. Here is the shape of the job:

1. Grade. the decomposed granite or fines 1/2 to 3/4 inch above the edging, inside an edge restraint (SRW says edging is necessary to keep the edges from breaking down).
2. Soak. the material with Path Stabilizer from a watering can at 20 sq ft per gallon, let it drain 40 to 60 minutes (do not let it dry out completely), then compact with multiple passes.
3. Top coat. after 24 hours, on a dry surface: residential 50 sq ft per gallon; commercial jobs use a 30 sq ft per gallon first application, then a 40 sq ft per gallon top coat. Allow up to 72 hours to fully cure with temperatures above 50F.
4. Maintain. SRW says a maintenance coat may be needed after 12 months.

Apply between 50F and 80F on a dry surface, and always test in a small discrete area first.

Quick Answers

What about drainage?
Plan for runoff and drainage when you design the path, and do not slope it toward buildings.

How long does it take to cure?
Allow up to 72 hours for a full cure, with temperatures staying above 50F throughout.

Is there anything I should know about handling it?
Wear gloves and eye protection, follow the label, and keep it away from children and pets until placed or cured. Full precautions are in the SDS below.

Official SRW Products Documentation

Documents are published by SRW Products. They open in a new tab. Every sheet we carry is also listed in our TDS and SDS library.

Questions about your project? Call (856) 418-4895 and you will get a real person who works with these stabilizers every day.