Quikrete Concrete Acrylic Fortifier 1 Gallon, Bonding Admixture No. 8610
Free hat or shirt with every order over $600. Pick your size in the cart, or see the gear.
Quikrete Concrete Acrylic Fortifier 1 Gallon, Bonding Admixture No. 8610 is backordered and will ship as soon as it is back in stock.
Ships same day on weekday orders placed before the 14:00 ET cut-off.
Typically 1 to 5 business days by UPS, FedEx Ground or USPS. Enter your ZIP for your dates.
Request a pallet quoteHow much do I need?Call (856) 418-4895
- Brand
- Quikrete
- Type
- Concrete Repair
About this item
- Better adhesion to clean stucco, concrete and masonry, with excellent toughness in the cured repair.
- Lower permeability, so the repair resists salt water, mild acids and other aggressive chemicals soaking in.
- Less drying shrinkage, which is what causes thin repairs to craze and crack as they cure.
- No moist curing needed under most conditions, so you are not tarping and misting a patch for days.
- Freeze and thaw protection and improved water resistance on exterior work.
Shipping, pick-up and returns
Shipping, pick-up and returns
Orders ship from Williamstown, New Jersey by UPS, FedEx Ground or USPS; weekday orders placed before 2 PM Eastern go out the same day. Warehouse pick-ups (call first so we can pull your order) and drop-off returns Monday to Friday 8 to 5, Saturday 8 to noon.
Quikrete Concrete Acrylic Fortifier 1 Gallon, Bonding Admixture No....
Quikrete Concrete Acrylic Fortifier 1 Gallon, Bonding Admixture No. 8610 is backordered and will ship as soon as it is back in stock.
How many bags do I need?
Coverage per bag comes from the manufacturer's data sheet for this exact sand.
Size1 gallon (3.8 L) jug
Ships same dayWeekday orders before 2 PM Eastern
Real humans(856) 418-4895, any hour
Pick up in NJWilliamstown, call ahead
Good to know about Quikrete Concrete Acrylic Fortifier 1?
Mix It Into The Mortar, Not Onto The Slab
Quikrete Concrete Acrylic Fortifier, product No. 8610, is a liquid polymer admixture.
Full description and specs
Mix It Into The Mortar, Not Onto The Slab
Quikrete Concrete Acrylic Fortifier, product No. 8610, is a liquid polymer admixture.
Mixing
Use the fortifier in place of some of the mix water. Dosage runs roughly half a gallon per 40 to 80 lb bag depending on which product you are modifying, so check the bag you are working.
Description
Description
Mix It Into The Mortar, Not Onto The Slab
Quikrete Concrete Acrylic Fortifier, product No. 8610, is a liquid polymer admixture. It replaces part of the mix water in Portland cement based repair mortars, patching compounds, stuccos and thin coatings, and the cured repair comes out tougher, tighter and better bonded than the same mix made with water alone. It is not painted onto the surface. If you need a bonding agent you brush or roll on before placing new concrete, that is the Quikrete Premium Concrete Bonding Adhesive No. 9902 instead.
What The Fortifier Changes
- Better adhesion to clean stucco, concrete and masonry, with excellent toughness in the cured repair.
- Lower permeability, so the repair resists salt water, mild acids and other aggressive chemicals soaking in.
- Less drying shrinkage, which is what causes thin repairs to craze and crack as they cure.
- No moist curing needed under most conditions, so you are not tarping and misting a patch for days.
- Freeze and thaw protection and improved water resistance on exterior work.
Where It Earns Its Keep
- Thin Portland cement coatings and skim coats over concrete or masonry.
- Driveway, sidewalk, step and patio patches that have to survive winter.
- Stucco and parge coats where shrinkage cracking is the usual failure.
- Quikrete Sand/Topping Mix, Finish Coat Stucco, Quick-Setting Cement, Surface Bonding Cement and Heavy Duty Masonry Coating, where you want the bond strength raised. Quikrete says not to use it with polymer modified products such as Re-Cap Resurfacer, with air-entrained masonry cement mortars, or together with Concrete Bonding Adhesive No. 9902.
Mixing
Use the fortifier in place of some of the mix water. Dosage runs roughly half a gallon per 40 to 80 lb bag depending on which product you are modifying, so check the bag you are working from. Mix to the consistency that product calls for and place it as you normally would. Quikrete says not to place it below 50 F or when the temperature may fall below 40 F within 24 hours.
Specifications
| Product Number | No. 8610 |
| Product Type | Acrylic polymer admixture and bonding agent |
| How It Is Used | Mixed into the material, replacing part of the mix water |
| Size | 1 gallon (3.8 L) jug |
| Typical Dosage | About 0.5 gallon per 40 to 80 lb bag, varies by product |
| Standard | Exceeds ASTM C1438 for latex and powder polymer modifiers |
| Use Location | Interior and exterior |
| Manufacturer | Quikrete |
Questions Before You Order
If you are not sure whether you need the fortifier or the bonding adhesive, call us at (856) 418-4895 or email info@polymericsandstore.com and we will point you at the right one.
Data sheets
Data sheets
The manufacturer's technical data sheet (coverage, joint width, cure and rain-safe times) and safety data sheet are collected in the TDS and SDS library. Every figure on this page comes from those sheets.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Questions about this product
Ask a question ›When will it ship?
Can I buy by the pallet?
Where are the technical and safety data sheets?
Is contractor or bulk pricing available?
How to repair concrete cracks
Step by step, start to finish. Click to play.
