Beige and Tan Polymeric Sand Color Samples, 5 Brands

What You Get

Two ounce, wide mouthed containers with lids, holding the beige and tan sands from Alliance Gator, SEK Surebond, Techniseal, Rhino and SRW. Every container is labeled with the manufacturer, the product and the color name, so whatever you pick you can order the right bag by name.

• One container per color in the beige and tan family across the brands we carry.
• Labeled with brand, product and color so nothing gets mixed up on the tailgate.
• Real product from factory sealed bags, not printed chips or a color card.
• Filled by Polymeric Sand Store in New Jersey. No manufacturer sells a cross brand pack, so we built one.

The Beige and Tan Range by Brand

Why a Cross Brand Pack Beats a Color Chart

Every manufacturer names its colors differently, and no two are quite the same shade. One brand's beige can sit noticeably warmer or cooler than another's. If you are matching existing pavers, or matching sand you installed years ago, the only way to get it right is to hold the real granules against the stone.

• Color names do not transfer between brands. Two products with the same name will not match.
• Printed charts and screens shift. The same sand looks different on two monitors.
• You may not be locked to one brand. If a competing product is the better color, this pack finds it.
• Matching an existing patio is unforgiving. A near miss reads as a mistake once it cures.

How to Compare

• Lay the containers out on the actual paver in daylight, not under indoor light.
• Mist each sample lightly with water. Cured joint sand is closer to the damp color than the dry color.
• Look again in shade and late in the day. Joint sand shifts as the light changes.
• Once you have a winner, note the brand and color name from the label and order the full bag by that name.

Please Read Before Ordering

This pack is for color reference only. It is not for testing product performance, strength or texture, and actual appearance can vary with lighting and with installation conditions. Choosing the right polymeric sand depends on joint width, the type of paver or stone, and the application, whether that is pedestrian, vehicular, an overlay or an overlay with drainage. Always check each manufacturer's own specifications and installation instructions before you buy the full size product. If you are not sure which product suits the job, call us and we will walk through it.

Made and Packed by Polymeric Sand Store

This is our own sample program. Polymeric Sand Store buys each of these sands by the bag and fills the two ounce containers here in New Jersey, which is why the vendor on this listing is Polymeric Sand Store rather than any one manufacturer. The sand inside every container is genuine product from that manufacturer, unaltered.

The manufacturer's technical data sheet (coverage, joint width, cure and rain-safe times) and safety data sheet are collected in the TDS and SDS library. Every figure on this page comes from those sheets.