DAP Ready-To-Use Concrete Patch 1 Gallon, Gray, Fiber Reinforced
by DAP
Availability:
in stock, fast shipping!
Original price
$54.99
-
Original price
$54.99
Original price
$54.99
$54.99
-
$54.99
Current price
$54.99
Open the Tub and Use It. No Mixing, No Additive.
DAP Ready-To-Use Concrete Patch is a latex emulsion compound with fibre reinforcement, supplied ready to use in a one gallon tub. It fills holes, cracks, chips and spalls in concrete and masonry, rejoins broken pieces, and repoints deteriorated mortar joints. It dries to a concrete gray.
Ready to use
No mixing, do not thin
8 sq ft
Per gallon at 1/8 in
1 in
Maximum depth
3 to 5 hrs
Set at 1/4 in
What It Is For
- Filling holes, cracks, dents and chips in concrete and masonry.
- Repairing breaks and spalls where a surface has flaked or broken away.
- Rejoining broken pieces of concrete or brick.
- Tuck pointing masonry and brickwork with deteriorated joints.
- Feather edging, since it can be smoothed out to nothing at the edge.
The Limitation Printed in Capitals
DAP states it in capital letters, so we will repeat it plainly: do not use this as a skim coat. It is a patching compound for discrete repairs, not a resurfacer for spreading thinly across a whole slab. If you want to renew a worn surface over a large area, a cement based resurfacer is the product for that job and we stock one. Using a patch compound as a skim coat is how people end up with a floor that debonds in sheets.
Specifications
| Manufacturer name | DAP Ready-To-Use Concrete Patch |
| DAP item number | 31090 for the 1 gallon |
| Type | Latex emulsion compound with fibre reinforcement |
| Coverage | About 8 sq ft per gallon at 1/8 inch |
| Application thickness | 1/8 inch, maximum 1 inch depth |
| Layering | Build in 1/4 inch layers, with drying between layers over 1/2 inch |
| Set time | 3 to 5 hours at 1/4 inch depth |
| Full cure | 48 hours at 1/4 inch depth |
| Application temperature | 50 F to 90 F |
| VOC | 26 g/L |
| Solids | 79.6 percent |
| Shelf life | 12 months unopened |
| Colour | Gray |
| Compressive strength | Not published by DAP |
Where DAP Says Not to Use It
- Not as a skim coat. Discrete repairs only.
- Not for repairs deeper than 1 inch.
- Not on surfaces taking vehicle traffic.
- Not where there is prolonged water exposure or full submersion. That rules out pool and pond repairs.
Getting a Repair That Lasts
- Clean the repair out. Loose material left in the hole is what the patch will fail against.
- Do not thin it. It is formulated ready to use and thinning weakens it.
- For anything deeper than half an inch, build up in quarter inch layers and let each dry.
- Allow overnight drying for surface patching, and longer for deep fills.
- Work between 50 F and 90 F. Outside that range the latex will not form a proper film.
Not Sure Whether You Need a Patch or a Resurfacer?
Describe the damage and how big an area it covers and we will tell you which product actually fits the job. Call or text (856) 418-4895 or email info@polymericsandstore.com.
Technical Documents
Documents open from the manufacturer, so you always get the current revision. Every sheet we carry is also listed on our TDS and SDS library.
Not sure how many 50 LB bags of polymeric sand your paver project will need? Try our Polymeric Sand Calculator