Techniseal NS Paver Sealer and Joint Stabilizer, Natural Look Eggshell
Protection Without Changing The Color Of Your Pavers
NS is Techniseal water based natural look protector. It forms a protective film over concrete pavers and slabs, shields them from erosion and staining agents, and stabilizes sand or aggregate joints at the same time, all without altering the original color. If the pavers already look the way the customer wants, this is the sealer that keeps them that way.
|
No Color Change Preserves the original paver color |
Eggshell Finish Natural look, film forming |
|
Stabilizes Joints Strengthens sand and aggregate joints |
150 sq ft per Gallon 750 sq ft per 5 gallon |
Why Contractors Ask for NS Natural Look Sealer by Name
Plenty of homeowners want their pavers protected but not darkened, glossed, or enhanced. A wet look sealer on the wrong patio is an expensive mistake to undo.
- It does not change the color. Techniseal is explicit that NS protects concrete pavers and slabs without any alteration to their original color. That is the whole reason this product exists in a line that also sells color enhancers.
- It stabilizes the joints too. NS works as a joint stabilizer, strengthening sand or aggregate joints as it seals. That is two jobs from one product.
- It forms a protective film. Unlike a penetrating sealer, NS builds a film over the surface, which is what gives it the erosion and stain resistance.
- Water based. Easier cleanup, lower odor, and no solvent handling on site.
- Eggshell finish. A very slight sheen rather than a matte flat or a gloss, which reads as natural on most concrete pavers.
- Known coverage. Techniseal publishes 150 sq ft per gallon and 750 sq ft per 5 gallon, so estimating is straightforward.
NS Natural Look Sealer Specifications
| Product Type | Paver sealer and joint stabilizer |
| Base | Water based |
| Finish | Eggshell |
| Look | Natural, no color change |
| Film Type | Film forming |
| Coverage, 1 Gallon | Up to 150 sq ft |
| Coverage, 5 Gallon | Up to 750 sq ft |
| Approved Surfaces | Concrete pavers and concrete slabs |
| Joint Stabilizing | Yes, sand and aggregate joints |
| Manufacturer | Techniseal |
Techniseal notes that actual coverage varies with joint width and surface porosity. Wide joints and porous pavers drink more sealer than the published figure suggests, so order accordingly on an older or heavily textured surface.
Where NS Natural Look Sealer Works
NS is the default choice when the brief is protect it, do not change it.
- Concrete paver patios, walkways, and driveways
- Concrete slab surfaces
- Newer pavers whose color the homeowner already likes
- Installations where a wet look or gloss would be wrong for the style
- Surfaces with sand or aggregate joints that need stabilizing
- Maintenance resealing where the original appearance must be matched
Where NS Natural Look Sealer Should NOT Be Used (Straight From the Manufacturer)
Techniseal lists concrete pavers and concrete slabs. For natural stone, look at iN or CB+ instead, both of which list natural stone.
This is a film forming sealer. If you specifically need a non film forming, impregnating product for a slip prone area, iN is the one in this line.
Do not apply over a dirty or efflorescent surface. Clean and prep first, or you seal the problem in permanently.
Read the current technical data sheet for temperature, moisture, and cure requirements before you start.
Not sure if your project qualifies? Call or text us at (856) 418-4895 before you order. We will give you a straight answer, even if the answer is that this is not the right product for your job.
How to Install NS Natural Look Sealer
Follow the official Techniseal instructions, linked below. This is the shape of the job:
- Clean the surface thoroughly and let it dry completely. Any efflorescence, dirt, or stain left behind gets sealed in.
- Confirm the joints are properly filled and cured.
- Test in a small discrete area first to confirm the finished appearance.
- Apply evenly per the technical data sheet, avoiding pooling in low areas.
- Respect the recoat and cure times given by Techniseal.
- Keep traffic off through the cure period.
Always test a small area first, even with a no color change sealer. Every paver reacts slightly differently and the test patch costs you five minutes.
Quick Answers
Will this darken my pavers?
No. Techniseal states NS protects without any alteration to the original color. For a deliberate color boost, use CB+ or JS instead.
Does it stabilize the joint sand?
Yes. NS works as a stabilizer for paver joints as well as a surface sealer.
How much do I need?
A gallon covers up to 150 sq ft and a 5 gallon covers up to 750 sq ft, before adjusting for joint width and paver porosity.
Can I use it on natural stone?
Techniseal lists concrete pavers and concrete slabs for NS. For natural stone, iN and CB+ both list it.
Is it water based?
Yes, which means easier cleanup and lower odor than a solvent based sealer.
What finish will I get?
Eggshell, which is a very slight sheen rather than a flat matte or a gloss.
Official Techniseal Documentation
Manufacturer page with specifications and coverage
View on techniseal.com β
Documents are published by Techniseal. For the most current versions, visit techniseal.com.
Pairs Well With
- Techniseal HD Paver Prep to clean and prep before sealing
- Techniseal SureFoot anti slip grit for pool decks and sloped areas
- Techniseal CB+ or JS if the customer does want a color boost
Order before our daily cutoff and your NS Natural Look Sealer ships today from New Jersey.
Questions about your project? Call or text (856) 418-4895 and you will get a real person who works with paver sealers every day.
Not sure how many 50 LB bags of polymeric sand your paver project will need? Try our Polymeric Sand Calculator