Techniseal Pro-Grade Oil & Grease Stain Remover- Quart

Techniseal Pro-Grade Oil & Grease Stain Remover — Industrial-Strength Oil Stain Remover for Pavers, Concrete & Stone

Got an ugly oil stain ruining your driveway, patio, or paver walkway? Techniseal Pro-Grade Oil & Grease Stain Remover is the industrial-strength, professional-grade oil stain remover and grease stain remover trusted by hardscape contractors, landscapers, property managers, and homeowners to lift the toughest embedded petroleum stains out of concrete pavers, natural stone, brick, and poured concrete. This quart-sized container delivers pro-level stain removal power with an unbelievably easy "apply and sweep" application — no scrubbing, no rinsing, no mess.

Formulated with a powerful citrus-based solvent, Techniseal Pro-Grade Oil & Grease Remover lifts and absorbs embedded oil, grease, motor oil, hydraulic fluid, transmission fluid, and petroleum-based stains as it dries from a liquid into an easy-sweep powder. Perfect for both new stains and old, deeply penetrated stains that other cleaners can't touch.

Why Techniseal Pro-Grade Oil & Grease Stain Remover?

Traditional degreasers, pressure washers, and household cleaners barely scratch the surface of embedded petroleum stains. Techniseal's industrial-strength oil and grease remover works differently — it penetrates deep into the paver or concrete, dissolves the oil and grease, then pulls it back out as the product cures into a dry powder you simply sweep away. No scrubbing. No messy rinse water. No discoloration. No damage to the paver.

From paver driveways with old motor oil spots to commercial parking lots, pool decks, patios, natural stone walkways, and concrete garage floors — this is the oil stain remover the pros reach for when ordinary cleaners fail.

Key Features & Benefits

• Industrial-strength oil and grease stain remover — professional-grade formula for the toughest embedded petroleum stains
• Removes penetrated petroleum-based stains — motor oil, engine oil, hydraulic fluid, transmission fluid, grease, cooking oil, and more
• Ideal for old, deeply set oil stains — works on stains that have been sitting for months or years
• Dries from a liquid to a powder — cleanest, easiest stain removal method available
• No scrubbing, no rinsing, no mess — apply, wait, sweep, done
• Works on sealed and unsealed surfaces — safe on bare pavers, previously sealed pavers, and concrete
• Won't damage or discolor pavers — preserves the natural appearance of your hardscape
• Professional hardscape contractor grade — trusted by pros for 30+ years
• Citrus-based solvent formula — powerful yet straightforward application
• Versatile application — residential, commercial, industrial, and municipal use
• 2-year shelf life when properly stored in original sealed container

What Surfaces Does It Work On?

Techniseal Pro-Grade Oil & Grease Stain Remover is specially formulated for and compatible with:

• Concrete pavers and interlocking concrete pavers
• Clay brick pavers and brick patios
• Natural stone, flagstone, bluestone, limestone, and sandstone
• Concrete slabs and poured concrete
• Stamped concrete and decorative concrete
• Interior concrete floors and garage floors
• Wet-cast pavers and manufactured stone
• Masonry walls and retaining walls

Do NOT use on asphalt — the solvent will dissolve asphalt binder.

Perfect For Removing Oil & Grease Stains On

• Paver driveways and concrete driveways
• Paver patios and outdoor entertainment areas
• Pool decks, pool coping, and pool surrounds
• Walkways, sidewalks, and garden paths
• Terraces, courtyards, and entryways
• Outdoor kitchens and grill areas (cooking oil, grease splatter)
• Commercial parking lots and fleet parking areas
• Gas stations, auto shops, and loading docks
• Garage floors and workshop floors
• Industrial pedestrian areas and warehouse entries

Application Instructions — How to Use Techniseal Pro-Grade Oil & Grease Remover

1. Shake well before using
2. Apply a generous amount of product directly onto the oil or grease stain
3. Let sit until the product fully dries into a powder — with temperatures above 60°F and good ventilation, this typically takes 5 to 8 hours. Cooler temperatures will slow the curing process significantly
4. Sweep up the dried powder with a broom and dispose of it per local regulations
5. Repeat if needed for particularly stubborn or deep stains

Note: The treated area may appear dark immediately after the powder is swept up. This is not oil — it's residual citrus-based solvent that will evaporate over the following hours or days, returning the surface to its natural color.

Important Notes & Safety Precautions

• This product will dissolve paver sealers and sealants. If your paver surface is sealed, expect the sealer to be stripped in the treated area and plan to reseal after stain removal.
• Always test on a small hidden area first to confirm texture and color meet expectations before full application.
• Do not use on asphalt — will damage the asphalt binder.
• Wear appropriate PPE — chemical-resistant gloves, safety glasses, and long sleeves during application.
• Use in well-ventilated areas.
• Keep away from open flames and ignition sources during application and curing.
• Dispose of used powder and empty container per all local, regional, national, and international regulations.
• Keep out of reach of children and pets.

Storage

Keep Techniseal Pro-Grade Oil & Grease Remover in its original, unopened, tightly sealed container. Store in a dry, well-ventilated location with controlled temperature between 40°F and 75°F. Protect from weather, direct sunlight, and freezing temperatures. Under proper storage conditions, the product has a shelf life of at least 2 years from date of production.

Safety Data Sheet (SDS)

For full safety, hazard, handling, and disposal information, please review the official manufacturer Safety Data Sheet before use:

• View the Official Techniseal Pro-Grade Oil & Grease Remover SDS (Safety Data Sheet)

Always consult the most current SDS from Techniseal before handling, applying, or disposing of this product. Information on this page is a summary only — in any conflict, the official SDS from Techniseal always prevails. To request an up-to-date SDS directly, visit techniseal.com or call 1-800-465-7325.

Frequently Asked Questions

Does Techniseal Pro-Grade Oil & Grease Remover work on old oil stains? Yes. This industrial-strength formula is specifically designed to lift both new and deeply penetrated, older petroleum stains out of pavers and concrete.

Will it damage or discolor my pavers? No — when used as directed, Techniseal Pro-Grade Oil & Grease Remover does not damage or discolor pavers, natural stone, or concrete. Always test a small hidden area first.

Can I use this on my sealed paver driveway? Yes, but note that the solvent will dissolve the sealer in the treated area. Plan to reseal the affected section after stain removal.

Can I use it on asphalt? No. The solvent will damage asphalt binder. Do not use on asphalt driveways or parking areas.

Do I need to scrub or rinse after application? No — this is one of the biggest advantages of the Techniseal system. The product dries to a powder that you simply sweep up and dispose of. No scrubbing, no rinse water, no mess.

How long does it take to work? With temperatures above 60°F and good ventilation, the product typically cures from liquid to powder in 5 to 8 hours. Cooler temperatures slow the process.

What if the area still looks dark after I sweep up the powder? That residual darkness is citrus-based solvent, not oil. It will evaporate on its own over the following hours or days.

Order Techniseal Pro-Grade Oil & Grease Stain Remover Today

Don't let a stubborn oil stain ruin your beautiful hardscape. Choose the industrial-strength oil and grease stain remover trusted by professional hardscape contractors — Techniseal Pro-Grade Oil & Grease Stain Remover, Quart. Powerful. Easy. Clean. Proven.

Order your quart today and see why pros reach for Techniseal when ordinary cleaners fail.