Techniseal Paint, Tar & Rubber Stain Remover- Quart

Professional Stain Remover for Pavers, Slabs, Concrete & Masonry

Lift the toughest stains off your hardscape with Techniseal Paint, Tar & Rubber Stain Remover — a professional-grade, water-rinsable stripper engineered to dissolve paint splatter, tar, bitumen, rubber tire marks, and even chewing gum from pavers, slabs, concrete, and masonry surfaces. This 1-quart bottle is the go-to spot treatment for hardscape contractors, property managers, and homeowners who need to rescue a driveway, patio, pool deck, or walkway from stubborn stains without damaging the surface underneath.

From fresh paint drips on a new patio to black rubber skid marks on a paver driveway, this powerful formula cuts through the mess, rinses away with water, and leaves your surface clean and ready for resealing.

Why Pros Reach for Techniseal Paint, Tar & Rubber Remover

Generic degreasers and household cleaners just can't break down the polymers in asphalt, rubber, and latex paint. Techniseal's professional solvent blend dissolves these tough substances with minimum scrubbing — and unlike harsh strippers, it rinses clean with water and won't discolor the surface when used as directed. It also dissolves existing paver sealers, making it perfect for spot-stripping prior to resealing.

Key Features & Benefits

• Dissolves paint, tar, bitumen, rubber & chewing gum — the four toughest hardscape stains
• Water-rinsable formula — no complicated cleanup, just rinse away
• Minimum scrubbing required — powerful solvents do the work for you
• Will not discolor the surface when used as directed
• Also dissolves existing sealers — ideal for spot stripping before resealing
• Professional-grade strength — trusted by hardscape contractors
• Works on a wide range of surfaces — pavers, slabs, concrete, brick, natural stone
• Convenient 1-quart size — perfect for spot treatments and touch-ups

Removes These Tough Stains

• Latex and oil-based paint drips, splatter, and overspray
• Tar, asphalt, and bitumen stains
• Rubber tire marks and skid marks
• Chewing gum
• Existing paver and concrete sealers

Works on These Surfaces

• Concrete pavers & interlocking pavers
• Concrete slabs (poured, wet-cast, stamped)
• Natural stone
• Brick
• Interior concrete
• Masonry

Product Specifications

• Manufacturer: Techniseal
• Product Type: Stain Remover / Stripper
• Size: 1 Quart (32 fl oz)
• Rinsing: Water-rinsable
• Coverage: Approx. 0.7–1 quart per 10.75 sq. ft. (varies by surface porosity)

Quick How-To

1. Test first — always test on a small, hidden area to confirm results meet your expectations.
2. Surface should ideally be dry and warm to the touch before application.
3. Cover the stain generously with the Remover and let it work for 5 to 10 minutes.
4. Reapply the product and scrub with a small nylon brush until the stain dissolves.
5. Do not let the product dry on the surface — rinse immediately with clean water.
6. Repeat if necessary for stubborn stains.
7. If the surface was previously sealed, apply a fresh coat of sealer to the treated area once dry.

Safety & Storage

Wear protective gloves and eye/face protection when handling. Keep away from flames or sparks. Keep out of reach of children. Store in the original, unopened, tightly sealed container in a dry, well-ventilated area. Always refer to the product's Safety Data Sheet (SDS) for complete handling, storage, and disposal information.

Frequently Asked Questions

Will this remove tire marks from my paver driveway?
Yes — rubber tire marks and skid marks are one of the primary stains this product is designed to dissolve. Apply generously, let it dwell 5–10 minutes, scrub with a nylon brush, and rinse immediately.

Will it damage or discolor my pavers?
When used as directed, the Remover will not discolor the surface. Always test on a small, hidden area first to confirm compatibility with your specific surface.

Does it remove paver sealer?
Yes — this product dissolves existing sealers. If you use it on a sealed surface, plan to reseal the treated area afterward.

How much area does 1 quart cover?
Approximately 10–15 sq. ft. depending on surface porosity and stain severity. This is a spot-treatment product, not a full-surface cleaner.

Does it work on paint?
Yes — effective on both latex and oil-based paint drips, splatter, and overspray on concrete, pavers, and masonry.

Can I use it on natural stone?
Yes — it's formulated for natural stone, brick, and concrete pavers. Always test first on softer or polished stones.

Rescue your pavers, driveway, and patio from the toughest stains. Order Techniseal Paint, Tar & Rubber Stain Remover — 1 Quart today.