Alliance Gator Clean XP Oil & Grease Remover for Pavers & Natural Stone 1-Qt
Alliance Gator Clean XP Oil & Grease Remover for Pavers 1 Quart Bottle - Pour N Go Extra Performance Shake it, Spread it, Let it Dry and Sweep it For Concrete Pavers & Natural Stones Easily Lifts & Absorbs Embedded Oil Stains as it Dries from Liquid to Powder No Scrubbing No Rinsing No Mess
Covers approx 6 square feet Always test a small area before use. Do not use on wet surfaces. Use above 40°F (4°C) and provide maximum ventilation.
INSTRUCTIONS Shake bottle before applying to stain, extending one inch beyond perimeter of the stain. Coating thickness should be 1/8" Allow to dry completely to powder. Wait 12 to 24 hours, depending on temperature, humidity and ventilation. Sweep it up. If area still appears dark, provide adequate ventilation and allow moisture to evaporate. If stain remains, reapply, scrub with hard bristled brush, and repeat steps 2 and
3. Rinse off any remaining residue with water. PLEASE NOTE Before using on sealed, colored, or painted surfaces, ALWAYS TEST the product on a small hidden area of approximately 4 square inches (26 sq. cm.) to ensure the results will meet your expectations. Prior use of other cleaners may inhibit performance. If applied on sealed pavers it may damage the seal.
CAUTION Provide maximum ventilation during use. Do not mix with other chemicals. KEEP OUT OF REACH OF CHILDREN AND PETS. Avoid contact with grass or plants. Avoid inhalation of dust when sweeping. Avoid eye and skin contact. EYE CONTACT: Flood eyes repeatedly with water and call physician. IF SWALLOWED: Do not induce vomiting. Drink a glass of water and call physician immediately.
Not sure how many 50 LB bags of polymeric sand your paver project will need? Try our Polymeric Sand Calculator