Gator Signature Series Natural Look
by Alliance
Availability:
in stock, free shipping!
Availability:
Out of stock
Original price
$110.99
-
Original price
$440.00
Original price
$110.99
$110.99
-
$440.00
Current price
$110.99
GATOR SEAL SIGNATURE SERIES FOR NATURAL LOOK is made from fluorochemical polymers. This sealer penetrates deep into the concrete pavers, walls, masonry and natural stones, therefore helps prevent the oil and dirt penetration, corrosion from de-icing salt, the effects from the UV rays and stains up of to 10 years.
PLEASE NOTE
- Concrete pavers should only be sealed 60 days after their installation date. Consult concrete paver manufacturers for their recommendation.
- Temperature should be between 32°F (0°C) and 85°F (29°C) when sealer is applied.
- Concrete paver surface must be cool to the touch when sealer is applied (between 32°F (0°C) and 85°F (29°C)).
- First clean concrete pavers with Gator Clean products. Remove all oil, grease and rust stains.
- Use Gator Efflorescence Cleaner to remove any trapped efflorescence. It also thoroughly cleans the surface to ensure a proper sealer adhesion.
- Use just one (1) coat of sealer.
- GATOR SEAL SIGNATURE SERIES FOR NATURAL LOOK can be applied on dry or damp surfaces.
- Specifically formulated to be used on unsealed surfaces only. Cannot be used as a resealer.
- Wear protective gloves, eye protection and respiratory protection.
Coverage
| Format | Approximate Surface Sealed |
|---|---|
| 1 U.S. gal. (3.78 L) | 175 sq. ft. (16 sq. m.) |
| 5 U.S. gal. (18.9 L) | 875 sq. ft (80 sq. m.) |
Coverages are approximate and will vary based on stone porosity, joint width and other factors.
Not sure how many 50 LB bags of polymeric sand your paver project will need? Try our Polymeric Sand Calculator