Alliance Gator Seal Wet Look Sealer for Pavers 1 Gal

GATOR SEAL WET LOOK is made from acrylic-based polymers. GATOR SEAL WET LOOK penetrates deep into the concrete pavers, therefore helps prevent the oil and dirt penetration, corrosion from de-icing salt and the effects from the UV rays. Specifically formulated to be used on unsealed surfaces only.

• PLEASE NOTE
  Concrete pavers should only be sealed 60 days after their installation date. Consult concrete paver manufacturers for their recommendation
  Concrete pavers and jointing sand MUST be 100% dry.
  Temperature should be between 60°F (16°C) and 85°F (29°C) when sealer is applied.
  Concrete paver surface must be cool to the touch when sealer is applied (between 60°F (16°C) and 85°F (29°C)).
  First clean concrete pavers with Gator Clean products. Remove all oil, grease and rust stains.
  Use Gator Efflorescence Cleaner to remove any trapped efflorescence. It also thoroughly cleans the surface to ensure a proper sealer adhesion.
  Use just one (1) layer of sealer.
  When using GATOR SEAL WET LOOK assure yourself at least 48 hours of dry conditions prior to applying the sealer.
  Specifically formulated to be used on unsealed surfaces only. Cannot be used as a resealer.
  Wear protective gloves, eye protection and respiratory protection.
  This sealer is to be employed without thinning or diluting under normal environmental conditions. Use acetone for cleaning. Alliance Designer Products shall not be liable for any non-compliant use.