Alliance Gator Seal Satin Look Sealer for Concrete Pavers
GATOR SEAL SATIN LOOK Sealer is made from acrylic-based polymers. GATOR SEAL SATIN LOOK Sealer penetrates deep into the concrete pavers, thus reducing the oil and dirt penetration, as well as protecting them from the corrosion of de-icing salt. Specifically formulated to be used on unsealed surfaces only. FEATURES Easier to clean and maintain Rain safe after 90 minutes Solvent based Low-gloss finish Joint Stabilizer Film Former Helps Resist Corrosion from de-icing salt Ultraviolet rays effects Motor oil and grease stains
1 Gallon covers approx 175 sq ft
5 Gallons covers approx 875 sq ft
- Rain safe after 90 minutes - Solvent Based
- Satin Finish - Film Former
- Joint Stabilizer - Easy to clean & maintain
- Resists against corrosion from de-icing salt , motor oil & grease stains
- Resists against UV Ray effects
Coverage
| Size | Approximate Surface Sealed |
|---|---|
| 1 U.S. gal. (3.78 L) | 175 sq. ft (16 sq. m.) |
| 5 U.S. gal. (18.9 L) | 875 sq. ft (80 sq. m.) |
Coverage will vary depending on joint size and porosity of the surface of the pavers.
Not sure how many 50 LB bags of polymeric sand your paver project will need? Try our Polymeric Sand Calculator